Toshiba Strata DK40 - Program 44-1~4 Toll Restriction

Program 44-1~4 Toll Restriction System & Station
Strata DK40 Programming Manual Spring 1999
3-103
Program 44-1~4
Toll Restriction
All Toll Restriction program information is provided later in Chapter 4.
Program *44 Overview
This program series defines the incoming digit translation. The system will either delete up
to four of the incoming digits or translate the first two incoming digits.
Program *44-1
Incoming Digit Translation Enable/Disable (Tie
Lines)
Program Type:
Toll Restriction
Initialised Default:
Incoming Digit Translation Disabled
Program *44-1 Overview
If set to 0 will not modify incoming digits, if set to 1 will delete incoming digits and if set to
2 translate the first two digits the system receives.
(QWH U 3 URJ 0 RGH 0 6SNU
*
77+ROG 6SNU 6SNU 4 +ROG 0 6SNU & & +ROG 0 6SNU & & +R OG
DATA = 0 to disable Incoming Digit Translation/Deletion
DATA = 1 to enable Incoming Digit Deletion
DATA = 2 to enable Incoming Digit Translation