Toshiba Strata DK40 - Program 91-1 Example

Program 91-1 Automatic PCB Recognition and Port Renumber Initialisation & Test
Strata DK40 Programming Manual Spring 1999
2-7
Program 91-1 Example
1
N-N is the Program Telephone [DN].
Action (press buttons + LED Buttons) LCD Response
1. Use the LCD programming phone per Minimum Hardware
Requirements on Page 1-18.
No. N-N
1
20 Jan Sun 06:43
2.
-
&
-
&4
-
5
-
6
Enter programming mode. (Do not press [DN] button.)
Program Mode
Password = ______________
3.
(QWHU >3DVVZR UG@ +ROG
Enter the four digit password.
level 1 Program Access
4.
6SNU +6SHDNHU,<4+ROG
Access Program 91. System beeps after
6SNU
+6SHDNHU,
is pressed to indicate program number may
be entered.
Program = 91
Data Store
5.
6SNU +6SHDNHU,
Prepare the system for a station port selection.
91 Select =
6.
3UHVV 4
91 Select = 1
Renumber and Reset
7.
3UHV V /(' %X WW RQV 34 DQG 35 +/('V WXU Q 21,
91 Select = 1
Renumber and Reset
8.
3UHV V +ROG
The telephone will exit the programming mode and button
LEDs 01 and 02 will go out after a short delay.
No. N-N
(Month Day Time)