System & Station
Program 36 Fixed Call Forward
3-80
Strata DK40 Programming Manual Spring 1999
Program 36
Fixed Call Forward
Program Type:
Station
Initialised Default:
Does not assign a Fixed Call Forward location to any port
Program 36 Overview
Fixed Call Forwarding is different from other station Call Forwarding options. It is fixed in
terms of the destination [PDN] which is assigned in this program. The station user cannot
change the Fixed Call Forward destination, unlike the other station Call Forwarding options.
If Fixed Call Forwarding is set on a station, the station does not ring and all calls forward
immediately. This feature is valuable for forwarding to voice mail (VM) devices or to an
attendant.
Note
Telephones must have a )L[HG0&DOO ) RUZDUG button to activate this feature
(See Programs 39).
(QWHU 3URJ 0RGH 0 6SNU 69+ROG 0 6SNU & +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor [PDN] Port Range
DK40 000~027
Port Forward to Tel Port Port Forward to Tel Port
000 014
001 015
002 016
003 017
004 018
005 019
006 020
007 021
008 022
009 023
010 024
011 025
012 026
013 027
SELECT = Station Logical Port Number
Enter the port number of the station that
needs a Fixed Call Forward location assigned.
To add a port range, enter XXX
*
XXX (low port
*
high port).
FORWARD TO TEL = Port Number
Enter the port number of the [PDN] that will be call forwarded
to when the
)L[HG &DOO )RUZDUG
button is pressed. Press LED
Button 01 to enter blanks.
To Next Page
Loading...
