Toshiba Strata DK40 - Program 44-1~4 Toll Restriction;Travelling Class Override Codes

Toll Restriction Program 44-1~4 Toll Restriction/Travelling Class Override Codes
4-10
Strata DK40 Programming Manual Spring 1999
Program 44-1~4
Toll Restriction/Travelling Class Override Codes
Program Type:
Toll Restriction
Initialised Default:
All Classes Blank (no code)
Program 44-1 ~ 4 Overview
This Program enables you to assign a code for each of the Toll Restriction classes established
in Program 46. If one of these codes is entered at a station, the station assumes the code’s
class for that call. When the call is complete, the station returns to its regular class assigned in
Program 48. The Travelling Class code data is not sent out the SMDR port and does not print
out on station call records. Account codes (Forced or Voluntary) can also be used for this
function, in which case the Account code will print out on SMDR (see Programs 69 and 70).
Notes
◆ Stations selected in Program 30, LED 16 ON, can add, change, or delete the codes
set in Program 44-1~4.
◆ When the Toll Restriction Override code is dialled, the station’s class (defined in
Program 48) changes to the class assigned to the code in Program 44-1~4.
◆ Do not use the same codes set in Program 45 (8 and 9).
◆ Stations enabled in Program 30, Button LED 16 ON, are allowed to enter and
change Toll Restriction Class (1~4) override codes.
(QWHU 3URJ 0RGH 0 6SNU 77+ROG 0 6SNU +ROG 0 6SNU & & +R OG 0 6SNU & & +ROG
Processor Toll Restriction Class
DK40 1~4
Toll Restriction Class SELECT = DATA = (1~4 Digit Code)
1
2
3
4
DATA = Toll Restriction Code for Selected Class (1~4 digits)
SELECT = Toll Restriction Class 1~4