System & Station
Program *29 Add-on Modules Button Assignments
3-56
Strata DK40 Programming Manual Spring 1999
Program *29
Add-on Modules Button Assignments
Program Type:
Station
Initialised Default:
see “Program 29 - Initialised Default DSS Console Button
Assignments” on Page 3-55
(QWHU 3URJ 0RGH 0 6SNU
*
5<+ROG 0 6SNU +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor ADMs
DK40 24
Button Type Code(s)
Personal Speed Dial Bin Numbers
*
10~
*
49
System Speed Dial Bin Numbers
*
600~
*
999
Exchange Line Range 001~012
Station Port Number Button Range
#
000~
#
027
Port _____ Port _____
Add-on Module 1 Add-on Module 2 Add-on Module 1 Add-on Module 2
Button Code Button Code Button Code Button Code Button Code Button Code Button Code Button Code
10 20 10 20 10 20 10 20
09 19 09 19 09 19 09 19
08 18 08 18 08 18 08 18
07 17 07 17 07 17 07 17
06 16 06 16 06 16 06 16
05 15 05 15 05 15 05 15
04 14 04 14 04 14 04 14
03 13 03 13 03 13 03 13
02 12 02 12 02 12 02 12
01 11 01 11 01 11 01 11
Enter the station logical port of the telephone which will
have buttons assigned to its attached Add-on module.
Enter the Add-on Module which will have buttons assigned
to it (0, 1, or 2). Enter 0 when removing ADMs.
CODE= See the Code Table below.
LED 01~20. Press the LED that is in the
same position as the Add-on Module button
being assigned.
To Next Page
Loading...
