Least Cost Routing
Program 55-1 and 2 Add Digits Before and/or After the Dialled Number
5-26
Strata DK40 Programming Manual Spring 1999
Program 55-1 and 2
Add Digits Before and/or After the Dialled Number
Initialised Default:
Leaves all tables Blank except Delete Digits, which are all 00
(QWHU 3URJ 0RGH 0 6SNU 88+ROG 0 6SNU ‡‡‡ +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Pause Entry Reference (Programs 55-1, 55-2) Special Buttons
Key/LED Pause (Seconds) Record Entry Key/LED Function
08 16 P8 09 Sub-Address
07 14 P7 10 Convert DP to DTMF
06 12 P6 11 Clear
05 10 P5 12 Auth Code 1
04 8 P4 13 Send Extension number
03 6 P3 14 Auth Code 2
02 4 P2 15 Auth Code 3
01 2 P1 16 Auth Code 4
17 Auth Code 5
18 Auth Code 6
19 Auth Code 7
20 Auth Code 8
Add to FRONT of Dialled Number (Program 55-1)
Table
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
01
02
03
04
05
06
CODE = Digits added (up to 22)
Enter the digits to be added. Pauses may be
coded as described in the pause entry
reference table below.
SELECT = Modified Digits Table
1 = Add digits in front of number dialled
2 = Add digits at the end of number dialled
(see Program 55 Legend)