Toshiba Strata DK40 - Program 45-8~9 Toll Restriction Override Code

Toll Restriction Program 45-8~9 Toll Restriction Override Code
4-14
Strata DK40 Programming Manual Spring 1999
Program 45-8~9
Toll Restriction Override Code
Program Type:
Toll Restriction
Initialised Default:
Leaves code assignments Blank
Program 45-8~9 Overview
This program enables selected stations in the system to alter the override code. These stations
are defined by their users - specified in Program 30, Button/LED 09.
Two different codes can be dialled by any station user to override station-specific restrictions.
These codes will not register on SMDR.
To change the codes from selected stations:
Code 1: [PDN] + &987 + code + 5HGLDO
Code 2: [PDN] + &988 + code + 5HGLDO
Notes
◆ Do not use the same four-digit codes set in Program 44-1~4, Toll Restriction/
Travelling Class Override codes.
◆ Program 45 (8~9) overrides Program 44-1~4 if the same codes are used.
◆ Electronic telephone users can use the & button instead of the 5HGLDO button.
◆ Verified Account Codes (Forced or Voluntary) can also be used to override Toll
Restriction on a call by call basis. When used for this function, the account code will
register on the SMDR report (see Programs 69 and 70).
(QWHU 3URJ 0 RGH 0 6SNU 78+ROG 0 6SNU +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
SELECT = Description DATA = (1 to 4 Digits)
8
(Code 1)
9
(Code 2)
DATA = Code
Enter 1 to 4-digit code from the table below.
Press LED Button 01 to delete or leave a blank.
Press LED Button 02 to allow all digits to work.
SELECT = Item 8 or 9
Enter 8 to select Code 1.
Enter 9 to select Code 2.