System & Station
Program *62-2 Transmission Pad Adjustments (Analogue Extension to ISDN2
Channel)
3-120
Strata DK40 Programming Manual Spring 1999
Program *62-2
Transmission Pad Adjustments
(Analogue Extension to ISDN2 Channel)
Program Type:
Station
Initialised Default:
6 - 18db for all ports
Program *62-2 Overview
This program allows the ‘Transmit’ transmission level from the analogue ports (DKT/EKT/2
wire), to digital exchange lines to be changed.
Important!
If a 2 wire port is programmed to use a Bearer Service of 3.1kHz, program
*62-1 Data=0, then “No Pad” is automatically inserted for those connections.
Any selection for that 2 wire port under this program will have no effect.
(QWHU 3URJ 0RGH 0 6SNU
*
95+ROG 0 6SNU 5&0+ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Port
Numbers Pad Code
Port
Numbers Pad Code
000
014
001 015
002 016
003 017
004 018
005 019
006 020
007 021
008 022
009 023
010
024
011
025
012
026
013
027
Enter one of the following pad codes for the transmission path.
0 = 0db
1 = -3db
2 = -6db
3= -9db
4 = -12db
5 = -15db
6 = -18db
7 = +3db
SELECT = Port Number (000 ~ 027)
To Next Page
Loading...
