Program 00 Software Check
Initialisation & Test
Strata DK40 Programming Manual Spring 1999
2-15
3. (QWHU >3DVVZ RUG@ +R OG
Enter the four digit password.
level 1 Program Access
4. 6SNU +6SHDNHU,33+ROG
Speaker beeps to indicate when to enter program
number. Access Program 00.
Program = 00
Data Store
5. 6SNU +6SHDNHU,
Prepare system for a selection.
00 Select =
1
N-N is the Program Telephone [DN].
Action (press buttons + LED Buttons) LCD Response
6. Select one of the following attributes:
3
View the software version. This attribute can not be
edited.
or...
00 Select = 0
TMEXNN-Key X
Note
NN = The actual version number
and letter. See Program 00
record sheet for details).
X = 1, 2, or 3.
41111
Define the Level 1 remote maintenance security code
from the System Record Sheet (four digits maximum).
Level 1 allows remote access to all programs and data.
Default Level 1 security code is “0000.”
or...
00 Select = 1
Password = 0000
51111
Define the Level 2 remote maintenance security code
from the System Record Sheet (four digits maximum).
Level 2 allows remote access to programs 30~39 and
77~89 only. Default Level 2 security code is “0000.”
or...
00 Select = 2
Password = 0000
6
Sets the system for UK & Ireland operation - A law.
This parameter must not be changed.
00 Select = 8
Data = XXXXXXXXX
;
View the software RAM Checksum. This attribute can
not be edited. The default checksum may change.
or...
00 Select = 8
Sum = XXXXXXXXX
Action (press buttons + LED Buttons) LCD Response
To Next Page
Loading...
