B56371
B51293
–INSTRUMENT PANEL/METER INSTRUMENT PANEL SAFETY PAD SUB–ASSY
71–21
2584Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
46. REMOVE INSTRUMENT PANEL REGISTER ASSY NO.2
(a) Disengage the 3 clips and 3 claws.
(b) Remove the instrument panel register assy No.2.
47. REMOVE INSTRUMENT PANEL REGISTER ASSY NO.1
(a) Disengage the 3 clips and 3 claws.
(b) Remove the instrument panel register assy No.1.
48. REMOVE GLOVE BOX LAMP ASSY
(a) Disengage the 4 claws and remove the glove box lamp assy.
49. REMOVE AUTOMATIC LIGHT CONTROL SENSOR(W/
CONLIGHT)
(a) Using a screwdriver, remove the automatic light control
sensor.
HINT:
Tape the screwdriver tip, before use.
50. REMOVE COOLER (SOLAR SENSOR)
THERMISTOR(AUTO AIR CONDITIONER)
(a) Remove the cooler (solar sensor) thermistor.
NOTICE:
Do not pry the cooler (solar sensor) thermistor off from the
upper position.
51. REMOVE SIDE DEFROSTER NOZZLE DUCT NO.2
(a) TMC made:
Remove the screw<H> and side defroster nozzle duct No.2.
(b) TMMK made:
Remove the screw<G or I> and side defroster nozzle duct No.2.
52. REMOVE SIDE DEFROSTER NOZZLE DUCT NO.1
(a) TMC made:
Remove the screw<H> and side defroster nozzle duct No.1.
(b) TMMK made:
Remove the screw<G or I> and side defroster nozzle duct No.1.