71–22
–INSTRUMENT PANEL/METER INSTRUMENT PANEL SAFETY PAD SUB–ASSY
2585Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
53. REMOVE DEFROSTER NOZZLE ASSY
(a) TMC made:
Remove the 5 screws<H> and defroster nozzle assy.
(b) TMMK made:
Remove the 5 screws<G or I> and defroster nozzle assy.
54. REMOVE HEATER TO REGISTER DUCT NO.1
(a) TMC made:
Remove the 2 screws<H> and heater to register duct No.1.
(b) TMMK made:
Remove the 2 screws<G or I> and heater to register duct No.1.
55. REMOVE HEATER TO REGISTER DUCT NO.3
(a) TMC made:
Remove the 2 screws<H> and heater to register duct No.3.
(b) TMMK made:
Remove the 2 screws<G or I> and heater to register duct No.3.
56. REMOVE HEATER TO REGISTER DUCT NO.2
(a) TMC made:
Remove the screw<H> and heater to register duct No.2.
(b) TMMK made:
Remove the screw<G or I> and heater to register duct No.2.
57. REMOVE DEFROSTER NOZZLE GARNISH NO.1
(a) Disengage the 5 clips and remove the defroster nozzle garnish No.1.
58. REMOVE PIN, INSTRUMENT PANEL, NO.1
(a) TMC made:
Remove the 2 screws<H> and 2 instrument panel pin No.1.
(b) TMMK made:
Remove the 2 screws<G or I> and 2 instrument panel pin No.1.
59. REMOVE INSTR PNL PASS L/DOOR AIR BAG ASSY
(See page 60–30)
60. INSTALL INSTR PNL PASS L/DOOR AIR BAG ASSY
(See page 60–30)
To Next Page
Loading...
