90
Groove
A52508
Groove
A52509
B11415
B11424
–ENGINE MECHANICAL CHAIN (2AZ–FE)
14–79
1603Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
35. REMOVE NO.2 CHAIN SUB–ASSY
(a) Turn the crankshaft counterclockwise 90, and align an
adjusting hole of the oil pump drive shaft gear with the
groove of the oil pump.
(b) Put a bar (φ4mm) in the adjusting hole of the oil pump
drive shaft gear to lock in position, and remove a nut.
(c) Remove the bolt, chain tensioner plate and spring.
(d) Remove the chain tensioner, oil pump drive shaft gear
and No.2 chain.
36. INSTALL NO.2 CHAIN SUB–ASSY
(a) Set the crankshaft key into the left horizontal position.
(b) Turn the cutout of the drive shaft to the top.
To Next Page
Loading...
