Mark Link
Timing Mark
Timing Mark
Mark Link
A52510
Groove
A52511
Groove
A52512
90
A36525
14–80
–ENGINE MECHANICAL CHAIN (2AZ–FE)
1604Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Align the mark links (yellow colored links) with the timing
marks of the gear as shown in the illustration.
(d) Insert the gears with chain to the crankshaft and oil pump
shaft.
(e) Temporarily tighten the oil pump drive shaft gear by a nut.
(f) Inset the damper spring into the adjusting hole, and install
the chain tensioner plate by a nut.
Torque: 12 N⋅m (122 kgf⋅cm, 9 ft⋅lbf)
(g) Align an adjusting hole of the oil pump drive shaft gear
with the groove of the oil pump.
(h) Put a bar (φ4mm) in the adjusting hole of the oil pump
drive shaft gear to lock in position, and assemble a nut.
Torque: 30 N⋅m (301 kgf⋅cm, 22 ft⋅lbf)
(i) Rotate the crankshaft counterclockwise 90, and align
the crankshaft key to the top.
To Next Page
Loading...
