Timing Marks
Timing Marks
A53018
A52505
Mark Link
Timing Mark
A52523
SST
A13337
–ENGINE MECHANICAL CHAIN (2AZ–FE)
14–81
1605Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
37. INSTALL CHAIN VIBRATION DAMPER NO.1
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
38. INSTALL CHAIN SUB–ASSY
(a) Set No.1 cylinder to TDC/compression.
(1) Align the timing marks of the camshaft timing
sprockets with No.1 bearing caps.
(2) Using the crankshaft pulley bolt, turn the crankshaft
and set the set key on the crankshaft upward.
(b) Align the mark link (gold or orange colored link) with the
timing mark of the crankshaft timing gear.
(c) Using a SST, install the sprocket.
SST 09309–37010
To Next Page
Loading...
