Timing Marks
Mark Links
Timing Mark
A52513
A53064
Seal Packing
A53053
14–82
–ENGINE MECHANICAL CHAIN (2AZ–FE)
1606Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(d) Align the mark links (gold or yellow colored links) with the
timing marks of the camshaft timing gear, and install the
chain.
39. INSTALL CHAIN TENSIONER SLIPPER
Torque: 19 N⋅m (194 kgf⋅cm, 14 ft⋅lbf)
40. INSTALL CRANKSHAFT POSITION SENSOR PLATE
NO.1
(a) Install the crankshaft position sensor plate the ”F” mark
facing forward.
41. INSTALL TIMING CHAIN OR BELT COVER SUB–ASSY
NOTICE:
Remove any oil from the contact surface.
Install the chain cover within 3 minutes after applying
seal packing.
Do not start the engine 2 hours after installing.
(a) Remove any old packing (FIPG) material and be careful
not to drop any oil on the contact surfaces of the timing
chain cover, cylinder head and cylinder block.
(b) Apply seal packing in the shape of bead (Diameter 2 mm
(0.099 in.)) as shown in the illustration.
Seal packing: Part No. 08826–00080 or equivalent
To Next Page
Loading...
