A52473
13542
Bearing Cap No. 2 Bearing Cap No. 3
A52458
Tighten Fix
A52459
Paint Mark
7 Links
Timing Mark
Groove
Paint Mark
Timing Marks
A52460
14–92
–ENGINE MECHANICAL CAMSHAFT (2AZ–FE)
1616Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Raising the camshaft, tighten the set bolt temporarily.
(c) Examine the from marks and numbers and tighten the
bolts in the sequence shown in the illustration.
Torque:
Bearing cap No. 2 30 N⋅m (301 kgf⋅cm, 22 ft⋅lbf)
Bearing cap No. 3 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
(d) Fix the camshaft with a spanner and so on, then tighten
the camshaft timing gear set bolt.
Torque: 54 N⋅m (551 kgf⋅cm, 40 ft⋅lbf)
NOTICE:
Be careful not to damage the valve lifter.
(e) As shown in the illustration, check the match marks on the
timing chain and camshaft timing sprockets and the align-
ment of the pulley groove with timing mark of the chain
cover.
To Next Page
Loading...
