Raise
Pin
Hook
Push
A52461
Engine
Front
A52462
Turn
Pin
Hook
Disconnect
A52463
Push
Plunger
Turn
A52464
–ENGINE MECHANICAL CAMSHAFT (2AZ–FE)
14–93
1617Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
17. INSTALL CHAIN TENSIONER ASSY NO.1
(a) Release the ratchet pawl, fully push in the plunger and ap-
ply the hook to the pin so that the plunger cannot spring
out.
(b) Install a new gasket and chain tensioner with the 2 nuts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
NOTICE:
When installing the tensioner, set the hook again if the
hook releases the plunger.
(c) Turn the crankshaft counterclockwise, and disconnect
the plunger knock pin from the hook.
(d) Turn the crankshaft clockwise, and check that the slipper
is pushed by the plunger.
To Next Page
Loading...
