Seal Packing
A53051
Nut
Nut
A61989
14–94
–ENGINE MECHANICAL CAMSHAFT (2AZ–FE)
1618Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
18. INSTALL CYLINDER HEAD COVER SUB–ASSY
(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to 2 locations as shown in the illustra-
tion.
Seal packing: Part No. 08826–00080 or equivalent
NOTICE:
Remove any oil the contact surface.
Install the cylinder head cover within 5 minutes after
applying seal packing.
Do not put into engine oil 2 hours after installing.
(c) Install the cylinder head cover with the 8 bolts and 2 nuts.
Torque: 11 N⋅m (110 kgf⋅cm, 8 ft⋅lbf)
19. CONNECT ENGINE WIRE
20. INSTALL IGNITION COIL ASSY
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
21. INSTALL FRONT WHEEL RH
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
22. INSPECT OIL LEAK
To Next Page
Loading...
