Toyota 2002 Camry - Page 356

15030–01
A59497
A59498
–EXHAUST EXHAUST PIPE (1MZ–FE)
15–5
1818Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
Removal & Installation and Disassembly & Reassembly
1. REMOVE OXYGEN SENSOR
(a) Disconnect the oxygen sensor connector.
(b) Remove the oxygen sensor.
2. REMOVE OXYGEN NO.2 SENSOR
(a) Disconnect the oxygen sensor connector.
(b) Remove the oxygen sensor.
3. REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET
(a) Remove the 2 nuts and remove the support bracket.
4. REMOVE FLOOR PANEL BRACE REAR
(a) Remove the 2 bolts and remove the floor panel brace rear.
5. REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET
6. REMOVE EXHAUST PIPE ASSY FRONT
7. REMOVE EXHAUST PIPE ASSY CENTER
8. REMOVE TAIL PIPE ASSY
9. INSTALL TAIL PIPE ASSY
10. INSTALL EXHAUST PIPE ASSY CENTER
(a) Install a new gasket and the center pipe to the tail pipe.
Torque: 56 N⋅m (571 kgf⋅cm,
41 ft⋅lbf)