Toyota 2002 Camry - Page 357

A60823
Front Pipe
Bracket
15–6
–EXHAUST EXHAUST PIPE (1MZ–FE)
1819Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
11. INSTALL EXHAUST PIPE ASSY FRONT
(a) Install a new gasket and the front pipe to the exhaust manifold RH.
Torque: 62 N⋅m (633 kgf⋅cm,
46 ft⋅lbf)
(b) Install a new gasket and the front pipe to the exhaust manifold converter No.2.
Torque: 62 N⋅m (633 kgf⋅cm,
46 ft⋅lbf)
(c) Install a new gasket and the front pipe to the center pipe.
Torque: 56 N⋅m (571 kgf⋅cm,
41 ft⋅lbf)
12. INSTALL EXHAUST PIPE NO.1 SUPPORT BRACKET
Torque: 33 N⋅m (337 kgf⋅cm,
24 ft⋅lbf)
HINT:
Be careful not to install the bracket in the wrong direction.
13. INSTALL FLOOR PANEL BRACE REAR
Torque: 20 N⋅m (199 kgf⋅cm,
14 ft⋅lbf)
14. INSTALL EXHAUST PIPE NO.1 SUPPORT BRACKET
Torque: 33 N⋅m (337 kgf⋅cm,
24 ft⋅lbf)
15. INSTALL OXYGEN SENSOR
Torque: 44 N⋅m (449 kgf⋅cm,
32 ft⋅lbf)
16. INSTALL OXYGEN NO.2 SENSOR
Torque: 44 N⋅m (449 kgf⋅cm,
32 ft⋅lbf)
17. CHECK EXHAUST GAS LEAK