C93768
5
5
Lower Bracket
Suspension support
Outside
Front
F02773
C92184
C66634
F41030
A
B
–REAR SUSPENSION SHOCK ABSORBER ASSY REAR LH
27–7
1940Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(e) Align the suspension support with the shock absorber
lower bracket, as shown in the illustration.
HINT:
Set the suspension support so that the ribbed part of the sus-
pension support faces out side.
(f) Install the collar to the piston rod.
(g) Temporarily install a new nut.
(h) Remove the SST.
SST 09727–30021
HINT:
After removing SST, recheck the direction of the suspension
support.
16. INSTALL REAR SHOCK ABSORBER WITH COIL
SPRING
(a) Install the shock absorber with the coil spring and 3 nuts.
Torque: 39 N⋅m (400 kgf⋅cm, 29 ft⋅lbf)
(b) Install the shock absorber with the coil spring, 2 bolts and
nuts.
Torque: 255 N⋅m (2,600 kgf⋅cm, 188 ft⋅lbf)
HINT:
Keep the bolt fixed while tightening the nut.
(c) Install the flexible hose and ABS speed sensor wire har-
ness with the 2 bolts.
Torque:
A: Flexible hose: 19 N⋅m (194 kgf⋅cm, 14 ft⋅lbf)
B: ABS speed sensor wire harness:
5.5 N⋅m (56 kgf⋅cm, 49 in⋅lbf)
To Next Page
Loading...
