Toyota 2002 Camry - Page 501

F40147
C92142
SST
Hold
Turn
F40142
C83850
SST
–DRIVE SHAFT / PROPELLER SHAFT FRONT DRIVE SHAFT
30–9
1963Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Remove the bolt, disconnect the speed sensor front LH
from the steering knuckle LH.
7. DISCONNECT TIE ROD ASSY LH
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect the tie rod assy LH from the steer-
ing knuckle LH.
SST 09628–62011
8. DISCONNECT FRONT SUSPENSION ARM
SUB–ASSY LOWER NO.1 LH
(a) Remove the bolt and 2 nuts, and disconnect the front sus-
pension arm sub–assy lower No.1 LH from the lower ball
joint assy front LH.
9. DISCONNECT FRONT AXLE ASSY LH
(a) Using a plastic hammer, disconnect the front drive shaft assy LH from the front axle hub sub–assy LH.
NOTICE:
w/ ABS:
Be careful not to damage the boot and speed sensor rotor.
10. REMOVE FRONT DRIVE SHAFT ASSY LH
(a) Using SST, remove the front drive shaft assy LH.
SST 09520–01010, 09520–24010 (09520–32040)
NOTICE:
Be careful not to damage the oil seal.