Toyota 2002 Camry - Page 515

F40230
SST
SST
F11547
SST
F40231
SST
F40157
SST
–DRIVE SHAFT / PROPELLER SHAFT FRONT AXLE HUB SUB–ASSY LH
30–23
1977Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
13. REMOVE FRONT AXLE HUB LH BEARING
(a) Place the inner race (outside) on the front axle hub LH
bearing.
(b) Using SST and a press, press the front axle hub LH bear-
ing until it contacts with the SST.
SST 09527–17011, 09950–60010 (09951–00600),
09950–70010 (09951–07100)
(c) Using a spanner to make the steering knuckle LH horizon-
tal, fix it to the V block as shown in the illustration.
NOTICE:
Be sure the steering knuckle is horizontally positioned.
(d) Using SST and a press, remove the front axle hub LH
bearing.
SST 09950–60010 (09951–00600), 09950–70010
(09951–07100)
14. INSTALL FRONT AXLE HUB LH BEARING
(a) Using SST and a press, install a new front axle hub LH
bearing to the steering knuckle LH.
SST 09950–60020 (09951–00790), 09950–70010
(09951–07100)
15. INSTALL DISC BRAKE DUST COVER FRONT LH
(a) Place the disc brake dust cover front LH and using a torx wrench (T30), torque the 4 bolts.
16. INSTALL FRONT AXLE HUB SUB–ASSY LH
(a) Using SST and a press, install the front axle hub sub–
assy LH.
SST 09608–32010, 09950–60020 (09951–00790),
09950–70010 (09951–07100)