C91493
C91494
D09639
D09639
D09641
40–4
–AUTOMATIC TRANSMISSION / TRANS PARK/NEUTRAL POSITION SWITCH ASSY
2079Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Pry out the lock plate.
(d) Remove the lock nut and lock plate.
(e) Remove the 2 bolts and pull out the park/neutral position
switch.
9. INSTALL PARK/NEUTRAL POSITION SWITCH ASSY
(a) Install the park/neutral position switch to the manual valve
shaft.
(b) Temporarily install the 2 bolts.
(c) Place a new lock plate and tighten the nut.
Torque: 6.9 N⋅m (70 kgf⋅cm, 61 in.⋅lbf)
(d) Temporarily install the control shaft lever.
(e) Turn the lever counterclockwise until it stops, then turn it
clockwise 2 notches.
(f) Remove the control shaft lever.