D25513
Groove
Neutral
Basic Line
D09643
D09644
D25414
D25415
–AUTOMATIC TRANSMISSION / TRANS PARK/NEUTRAL POSITION SWITCH ASSY
40–5
2080Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(g) Align the groove with neutral basic line.
(h) Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 N⋅m (55 kgf⋅cm, 48 in.⋅lbf)
(i) Using a screwdriver, stake the nut with the lock plate.
(j) Install the control shaft lever, washer and nut.
Torque: 12.7 N⋅m (130 kgf⋅cm, 9 ft⋅lbf)
10. INSTALL TRANSMISSION CONTROL CABLE ASSY
(a) Temporarily install the control cable to the control shaft le-
ver with the nut.
(b) Install the control cable and a new clip to the bracket.
(c) Connect the park/neutral position switch connector.
To Next Page
Loading...
