C50017
D03553
B
C
A
A
A
B
B
C
C
C69150
D09179
–AUTOMATIC TRANSMISSION / TRANS TRANSMISSION VALVE BODY ASSY
40–31
2106Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Install the spring and check ball body.
(c) Align the groove of the manual valve with the pin of lever.
(d) Install the 17 bolts.
Torque: 10.8 N⋅m (110 kgf⋅cm, 8 ft⋅lbf)
NOTICE:
Push the valve body against the accumulator piston
spring and the check ball body to install it.
Tighten those bolts marked by in the illustration
first temporarily because they are positioning bolts.
Bolt length:
Bolt A: 25 mm (0.984 in.)
Bolt B: 41 mm (1.614 in.)
Bolt C: 45 mm (1.771 in.)
8. INSTALL VALVE BODY OIL STRAINER ASSY
(a) Coat a new O–ring with ATF.
(b) Install the O–ring to the oil strainer.
(c) Install the oil strainer with the 3 bolts.
Torque: 10.8 N⋅m (110 kgf⋅cm, 8 ft⋅lbf)
To Next Page
Loading...
