D25591
D25674
C83111
40–32
–AUTOMATIC TRANSMISSION / TRANS TRANSMISSION VALVE BODY ASSY
2107Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
9. INSTALL TRANSMISSION WIRE
(a) Coat an O–ring with ATF.
(b) Install the ATF temperature sensor with the lock plate and
bolt.
Torque: 6.6 N⋅m (67 kgf⋅cm, 58 in.⋅lbf)
(c) Connect the 5 shift solenoid valve connectors.
10. INSTALL AUTOMATIC TRANSAXLE OIL PAN
SUB–ASSY
(a) Install the 2 magnets in the oil pan.
(b) Apply seal packing or equivalent to 18 bolts.
Seal packing:
THREE BOND 2430 or equivalent
(c) Install a new gasket, oil pan and 18 bolts to the transaxle
case.
Torque: 7.8 N⋅m (80 kgf⋅cm, 69 in.⋅lbf)
NOTICE:
Because the bolts should be seal bolts, apply seal packing
to bolts and tighten them within 10 minutes after applica-
tion.
11. ADD AUTOMATIC TRANSAXLE FLUID
12. INSPECT AUTOMATIC TRANSAXLE FLUID(See page 40–1)
To Next Page
Loading...
