Toyota 2002 Camry - Page 675

4104V–01
D26291
Select Cable
Retainer
Shift Cable
Grommet
D26291
Select Cable
Retainer
Shift Cable
Grommet
–MANUAL TRANSMISSION/TRANSAXLE FLOOR SHIFT CABLE TRANSMISSION CONTROL
SHIFT
41–7
2137Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
REPLACEMENT
1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB–ASSY
(See page 71–12)
2. REMOVE AIR CONDITIONING RADIATOR ASSY
(See page 55–29)
3. REMOVE AIR BAG SENSOR ASSY CENTER
(See page 60–56)
4. REMOVE FLOOR SHIFT CABLE TRANSMISSION
CONTROL SHIFT
(a) Remove the clip and washer and separate the top of the
shift cable from the transaxle.
(b) Remove the clip and shift cable from the control cable
bracket.
(c) Turn the lock and separate the shift cable from the shift
lever retainer.
(d) Separate the top of the shift cable from the shift lever
assy.
(e) Remove the 2 retainer set bolts from the floor.
(f) Separate the retainer from the grommet.
(g) Remove the select cable from the grommet.
(h) Remove the shift cable through the floor hole and retain-
er.
5. INSTALL FLOOR SHIFT CABLE TRANSMISSION
CONTROL SHIFT
(a) Put the shift cable through the floor hole and retainer.
(b) Install the select cable to the grommet.
(c) Install the retainer to the grommet.
NOTICE:
Fit 3 projections of the grommet into 3 holes of the retainer.
(d) Install the 2 retainer set bolts.
Torque: 5.0 N⋅m (51 kgf⋅cm, 44 in.⋅lbf)