C83254
C83227
C83226
C83255
C83256
41–34
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
2164Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
75. ADJUST OUTPUT SHAFT BEARING PRELOAD
(a) Install the output shaft to the manual transaxle case.
(b) Install the transmission case with 14 bolts to the manual
transaxle case.
Torque: 29 N⋅m (296 kgf⋅cm, 21 ft⋅lbf)
(c) Install the 3 bolts to the manual transaxle side.
Torque: 30 N⋅m (306 kgf⋅cm, 22 ft⋅lbf)
(d) Install the output shaft rear bearing shim to the output
shaft.
HINT:
Install the same thickness of case shim as the removed one.
(e) Using a torx socket wrench (T45), install the bearing re-
tainer RR with 7 screws to the manual transmission case.
Torque: 42 N⋅m (428 kgf⋅cm, 31 ft⋅lbf)
(f) Install the new output rear set nut to the output shaft.
To Next Page
Loading...
