Toyota 2002 Camry - Page 715

C69516
C69517
C69266
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
41–47
2177Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
Part No. MarkThickness
90520–27063
1.85 – 1.90
(0.0728 – 0.0748)
c
90520–27064
1.90 – 1.95
(0.0748 – 0.0768)
d
90520–27065
1.95 – 2.00
(0.0768 – 0.0787)
e
90520–27066
2.00 – 2.05
(0.0787 – 0.0807)
f
90520–27067
2.05 – 2.10
(0.0807 – 0.0827)
g
90520–27068
2.10 – 2.15
(0.0827 – 0.0846)
h
90520–27069
2.15 – 2.20
(0.0846 – 0.0866)
j
106. INSPECT 5TH GEAR RADIAL CLEARANCE
(a) Using a dial indicator, inspect the 5th gear radial clear-
ance.
Standard clearance:
0.009 – 0.050 mm (0.0004 – 0.0020 in.)
If the clearance is out of the specification, replace 1st gear
needle roller bearing.
107. INSPECT 5TH GEAR THRUST CLEARANCE
(a) Using a dial indicator, inspect the 5th gear thrust clear-
ance.
Standard clearance:
0.10 – 0.65 mm (0.0039 – 0.0260 in.)
108. INSTALL MANUAL TRANSMISSION OUTPUT SHAFT
REAR SET NUT
(a) Engage the gear double meshing.