C90287
C69766
C69756
C83219
C87967
41–48
–MANUAL TRANSMISSION/TRANSAXLE MANUAL TRANSAXLE ASSY (E351)
2178Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Install the new manual transmission output shaft rear set
nut.
Torque: 123 N⋅m (1,254 kgf⋅cm, 91 ft⋅lbf)
(c) Using a chisel and a hammer, stake the manual transmis-
sion output shaft rear set nut.
109. INSTALL MANUAL TRANSMISSION CASE COVER
SUB–ASSY
(a) Apply FIPG to the transaxle case cover sub–assy, as
shown in the installation.
FIPG:
Part No. 08826–00090, THREE BOND 1281
NOTICE:
Install the parts within 10 minutes after applying the pack-
ing material (FIPG).
(b) Install the transmission case cover sub–assy with 10 bolts
to the manual transaxle case.
110. INSTALL DRAIN (MTM) PLUG SUB–ASSY
(a) Install the drain plug sub–assy with new gasket to the
manual transmission case.
Torque: 49 N⋅m (500 kgf⋅cm, 36 ft⋅lbf)
To Next Page
Loading...
