Toyota 2002 Camry - Page 827

F40339
Power Steering Fluid
F40339
Power Steering Fluid
F40340
F40341
Inscribed
Mark
51–22
–POWER STEERING VANE PUMP ASSY (1MZ–FE)
2289Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
31. INSTALL PUMP BRACKET FRONT
(a) Install the pump bracket front with the bolt.
Torque:
Type A Vane Pump: 43 N⋅m (438 kgf⋅cm, 32 ft⋅lbf)
Type B Vane Pump: 44 N⋅m (449 kgf⋅cm, 32 ft⋅lbf)
32. INSTALL VANE PUMP SHAFT(TYPE A VANE PUMP)
(a) Coat inside bushing surface of the vane pump housing
front with power steering fluid.
(b) Gradually insert the vane pump shaft from the pulley side.
NOTICE:
Do not damage the vane pump housing oil seal lip in the
vane pump housing front.
33. INSTALL W/PULLEY SHAFT SUB–ASSY(TYPE B
VANE PUMP)
(a) Coat inside bushing surface of the vane pump housing
front with power steering fluid.
(b) Gradually insert the w/pulley shaft sub–assy from the
pulley side.
NOTICE:
Do not damage the vane pump housing oil seal lip in the
vane pump housing front.
34. INSTALL VANE PUMP ROTOR
(a) Install the vane pump rotor.
(b) Using a shaft snap ring expander, install a new vane
pump shaft snap ring to the vane pump shaft.
35. INSTALL VANE PUMP CAM RING
(a) Align the holes of the vane pump cam ring with 2 straight
pins, and install the vane pump cam ring with inscribed
mark facing outward.