Toyota 2002 Camry - Page 843

F40545
SST
SST
W02101
Rack Teeth End
SST
F40543
SST
51–38
–POWER STEERING RACK & PINION POWER STEERING GEAR ASSY
2305Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
40. INSTALL POWER STEERING CYLINDER TUBE OIL
SEAL
(a) Coat a new power steering cylinder tube oil seal lip with
power steering fluid.
SST 09950–60010 (09951–00420, 09951–00250,
09952–06010), 09950–70010 (09951–07360)
(b) Using SST and a press, install the power steering cylinder
tube oil seal.
NOTICE:
 Make sure that the power steering cylinder tube oil
seal is installed facing in the correct direction.
 Take care so that the power steering cylinder tube oil
seal will not be reversed as you install it.
41. INSTALL POWER STEERING RACK
(a) Install SST to the power steering rack.
SST 09631–33010
HINT:
If necessary, scrape the burrs off the power steering rack teeth
end and burnish.
(b) Coat the SST with power steering fluid.
(c) Install the power steering rack into the rack housing.
(d) Remove the SST.
42. INSTALL POWER STEERING RACK BUSH
(a) Using SST and a press, install the rack bush oil seal to the
power steering rack bush.
SST 09950–60010 (09951–00400), 09950–70010
(09951–07100)
NOTICE:
Make sure that the rack bush oil seal is installed facing in
the correct direction.
(b) Coat a new O–ring with power steering fluid and install it
to the power steering rack bush.