Toyota 2002 Camry - Page 846

F41513
SST
F41502
F41608
F41514
SST
–POWER STEERING RACK & PINION POWER STEERING GEAR ASSY
51–41
2308Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(n) Using SST, stop the control valve rotation and install a
new lock nut.
Torque: 24.5 N⋅m (250 kgf⋅cm, 18 ft⋅lbf)
SST 09616–00011
(o) Apply sealant to 2 or 3 threads of the rack housing cap.
Sealant:
Part No. 08833–00080, THREE BOND 1344, LOCTITE
242 or equivalent
(p) Using a socket wrench (27 mm), install the rack housing
cap.
Torque: 58.5 N⋅m (597 kgf⋅cm, 43 ft⋅lbf)
(q) Using a punch and a hummer, stake the rack housing cap
and rack housing.
47. INSTALL RACK GUIDE
(a) Install the rack guide.
(b) Install the compression spring.
(c) Apply sealant to 2 or 3 threads of the rack guide spring cap.
Sealant:
Part No. 08833–00080, THREE BOND 1344, LOCTITE 242 or equivalent
(d) Temporarily install the rack guide spring cap.
48. ADJUST TOTAL PRELOAD
(a) To prevent the steering rack teeth from damaging the oil
seal lip, temporarily install the RH and LH steering rack
ends sub–assy.
(b) Using SST, torque the rack guide spring cap.
SST 09631–10021
Torque: 25 N⋅m (254 kgf⋅cm, 18 ft⋅lbf)