Toyota 2002 Camry - Page 920

I31541
I31539
I31538
–HEATER & AIR CONDITIONER COOLER CONDENSER ASSY
55–67
2382Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
9. INSTALL COOLER CONDENSER ASSY
(a) Install the cooler condenser assy with the 2 nuts.
Torque: 9.8 N⋅m (100 kgf⋅cm, 85 in.⋅lbf)
10. INSTALL RADIATOR SUPPORT UPPER
1MZ–FE: (See page 16–26)
2AZ–FE: (See page 16–12)
11. INSTALL COOLER REFRIGERANT LIQUID PIPE A
(a) Remove the attached vinyl tape from the tube and con-
necting part of the cooler condenser assy.
(b) Sufficiently apply compressor oil to the new O–ring and
pipe joint.
Compressor oil: ND–OIL 8 or equivalent
(c) Install a O–ring to the cooler refrigerant liquid pipe A.
(d) Connect the cooler refrigerant liquid pipe A to the cooler
condenser assy with the bolt.
Torque: 5.4 N⋅m (55 kgf⋅cm, 47 in.⋅lbf)
12. INSTALL COOLER REFRIGERANT DISCHARGE
HOSE NO.1
(a) Remove the attached vinyl tape from the tube and con-
necting part of the cooler condenser assy.
(b) Sufficiently apply compressor oil to the new O–ring and
hose joint.
Compressor oil: ND–OIL 8 or equivalent
(c) Install a O–ring to the cooler refrigerant discharge hose
No. 1.
(d) Connect the cooler refrigerant discharge hose No. 1 to
the cooler condenser assy with the bolt.
Torque: 5.4 N⋅m (55 kgf⋅cm, 47 in.⋅lbf)