Encompass 4 Reader System Guide
D-22
Input0 change report 821 Done
Input1 change report 822 Done
Input status change reports
disable
820 Done
Multi-tag sort disable 454 Done
Multi-tag sort enable 455 Done
Odd parity select 1022 Done
Tag protocols display 570 ATA:<E, D> eGo:<I, F, D>
SeGo:<I, F, D> IAG:<E, D>
Sort:<E, D>
I = ID (64 bits)
E = Enabled
F = Full transaction (eATA)
D = Disabled
Output pulse duration set
N = 0–F
(4,8,12,16,20,24,32,40,48,60,76,
152, 228,300,376,752 ms)
67N Done
Output pulse duration set to
228 ms
67C Done
Output0 turn on 6201 Done
Output1 turn on 6202 Done
Outputs turn off both 6200 Done
Outputs turn on both 6203 Done
Parity disable 1020 Done
Power fail bit display 520 PWRB Px R0
P0 = no power fail has occurred
P1 = power fail has occurred
R0 = not applicable
Power fail bit reset 65 Done
Predefined output mode select 621 Done
Table D-3 Encompass 4 Reader Commands Listed Alphabetically (continued)
Command Name Code Reader Message
To Next Page
Loading...
