System Menu
ADVANCED OPERATION GUIDE 6-13
7
To change the name for Custom 1(-8), press [Change] of Name to enter
the name and press [OK].
NOTE: Refer to the Appendix of the Operation Guide for entering
characters.
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE: [Cassette 3] and [Cassette 4] are displayed when the optional
paper feeders or optional 3000 sheet paper feeder installed.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original/Paper Setup and then
[Change] of Default Paper Source.
3
Select default
setting for paper
cassette.
4
Press [OK].
Automatic Detection of Originals
Automatically detect originals of special or non-standard size.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original/Paper Setup and then [Next]
of Original Auto Detect.
Common Settings - Defaul t Paper Source
Select paper cassette for default setting.
Cassette 2 Cassette 3
Cassette 1
Cancel OK
Status 10/5/2006 10:10
Cassette 4 Multi Purpose
Tray
Item Description
A6/Hagaki As A6 and Hagaki are similar in size, select
either one of them for automatic detection.
Folio Select Folio for automatic detection.
11×15" Select the 11×15" size for automatic
detection.
To Next Page
Loading...
Need help?
General
