Utax CD 1230

System Menu
6-28 ADVANCED OPERATION GUIDE
2
Press [Common Settings], [Next] of Function Defaults, [T] and then
[Change] of Border Erase Default.
3
Press [+] or [–] for
the Border and
Gutter width to
erase.
4
Press [OK].
Margin Default
Set the default margin.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [T] and then
[Change] of Margin Default.
3
Press [W] or [X] for
the Left/Right and
press [S] or [T] for
Top/Bottom width
margin.
4
Press [OK].
Common Settings - Border Erase Default
Select the defaul t margi n width.
Use [+]/[-] or the number keys to enter a number.
Border(0 - 50)
5
Cancel OK
Status 10/5/2006 10:10
# Keys
Paper is present in Document Processor.
mm
Gutter(0 - 50)
5
# Keys
mm
Specification Range
Inch models -0.75 to 0.75" (in 0.01" increments)
Metric models -18 mm to 18 mm (in 1 mm increments)
Common Settings - Margi n Defaul t
Select the default margin width.
Use [+]/[-] or the number keys to enter a number.
L/R(-18 - +18)
0
Cancel OK
Status 10/5/2006 10:10
# Keys
Paper is present in Document Processor.
mm
T/B(-18 - +18)
0
# Keys
mm