System Menu
6-72 ADVANCED OPERATION GUIDE
The Folder (FTP) Address
1 Press [Host Name], [Path], [Login User Name], and [Login
Password] to enter relevant information respectively and press [OK].
NOTE: Refer to the Appendix of the Operation Guide for entering
characters.
2 Check if the entries are correct and press [OK].
NOTE: Press [Connection Test] to check the connection to the FTP
server you chose. If the connection fails, check the entries you made.
Item Description
Host Name Enter the FTP server name in not more than 62
characters. If the port number is other than 21,
enter the port number into the server name
column.
Path Enter the path of the folder to which you want to
upload the data in not more than 126 characters.
For example, if you want to store the data in the
ScanData folder of the home directory, enter
ScanData. Without any entry here, the data would
be stored in the home directory.
Login User
Name
Enter the user name to log in the FTP server in
not more than 62 characters.
Login
Password
Enter the password to log in the FTP server in not
more than 62 characters.
Address - Folder Path Entr y
SMB
OK
Status 10/5/2006 10:10
Cancel
FTP
Host Name
Path
Login
User Name
Login
Password
Connection
Test
To Next Page
Loading...
Need help?
General
