Management
ADVANCED OPERATION GUIDE 7-19
6
Press [Detail].
7
Press [Check] at the
function to check the
count. The results
will be displayed.
8
Confirm the count and press [Close].
9
Press [Execute] of Counter Reset to reset the counter.
10
Press [Yes] on the screen to confirm the reset. The counter will be reset.
Counting by Paper Size
This counts the number of pages by paper size (e.g. Letter).
NOTE: Paper size is available in five type, - 1 to 5. These types are
specified in accounting reports. Refer to Printing an Accounting Report on
page 7-20.
In addition to paper size, paper type can also be specified (e.g. count the
letter-size color paper used). Without specifying paper type, all types of
paper in the size are counted.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is invalid, the user authentication screen is
displayed. Enter a login user name and password, and press [Login]. By
default, the login user name and password are 5050 respectively.
4
Press [Next] of Job Accounting Setting, [Next] of Default Setting, [Change]
of Count by Paper Size, [Change] of Paper Size 1 to 5 and then [On].
Account
Print Pages:
FAX Transmission Time:
Close
Status
10/5/2006 10:10
Scan Pages:
Counter Reset
FAX Transmission Pages:
Check Check
Execute
5,500
1h 15min.
To Next Page
Loading...
Need help?
General
