Copying Functions
1-34 ADVANCED OPERATION GUIDE
3
Select the desired
Duplex mode.
4
If you choose [2 sided >> 2 sided], [2 sided >> 1 sided], [Book >> 1 sided]
or [Book >> 2 sided], select the binding edge of the originals of Original.
5
If you choose [1 sided >> 2 sided], [2 sided >> 2 sided] or [Book >> 2
sided], select the binding edge of the finished copies of Finishing.
6
Press [Original Orientation] to select orientation of the originals, either [Top
Edge Top] or [Top Edge Left]. Then press [OK].
7
Press [OK].
8
Place the originals in the document processor or on the platen and press
the Start key.
If the original is placed on the platen, replace the original and press the
Start key.
After scanning all originals, press [Scan Finish] to start copying.
Status 10/5/2006 10:10
Ready to copy.
Copies
Cancel OK
Duplex
Press [OK] to display
Add Shortcut
Book
>>2-sided
1-sided
>>2-sided
Top Edge Top
Original
Orientation
1-sided
>>1-sided
2-sided
>>2-sided
Finishing
Bindi ng
Left/Right
Binding
Top
2-sided
>>1-sided
Book
>>1-sided
1
the image.
To Next Page
Loading...
Need help?
General
