Vacon 100 flow Applications Manual

NOTE!
If you have not saved the parameter set with which you want to compare the
current set, the display shows the text Comparing failed.
USING THE FUNCTION PARAMETER COMPARE
1 Go into Parameter Compare in the User settings
menu.
STOP
READY I/O
ID: M6.6
User Settings
Language Selection
Parameter Backup
Parameter Compare
English
(4)
(7)
2 Make a selection of the pair of sets. Push OK to
accept the selection.
STOP
READY I/O
ID: B6.6.1
Parameter Compare
Active set-Set 1
Active set-Set 2
Active set-Defaults
3 Make a selection of Active and push OK.
STOP
READY I/O
ID: M6.6.1
Active set-Set 1
Active
Help
Add to Favourites
USER INTERFACES VACON · 101
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
3

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V