Vacon 100 flow Applications Manual

ID2309 Energy Trip Counter Unit
The energy trip counter unit gives the unit for the value of the Energy Trip Counter.
•
0 = kWh
•
1 = MWh
•
2 = GWh
•
3 = TWh
•
4 = PWh
ID2312 Energy Trip Counter Reset
To reset the energy trip counter, use the PC, the control panel, or the fieldbus. If you use the
PC or the control panel, reset the counter in the Diagnostics menu. If you use the fieldbus,
set a rising edge to ID2312 Energy Trip Counter Reset.
10.23 ADVANCED HARMONIC FILTER
P3.23.1 CAPACITOR DISCONNECTION LIMIT (ID 15510)
Use this parameter to set the disconnection limit for the advanced harmonic filter. The value
is in percentage of the drive nominal power.
P3.23.2 CAPACITOR DISCONNECTION HYSTERESIS (ID 15511)
Use this parameter to set the disconnection hysteresis for the advanced harmonic filter. The
value is in percentage of the drive nominal power.
P3.23.3 AHF OVER TEMPERATURE (ID 15513)
Use this parameter to set the digital input signal that activates AHF Over Temp (fault ID
1118).
P3.23.4 AHF FAULT RESPONSE (ID 15512)
Use this parameter to select the response of the AC drive to an AHF Over Temp fault.
PARAMETER DESCRIPTIONS VACON · 359
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V