Vacon 100 flow Applications Manual

2 Find the item that you want to remove. Push the OK
button.
STOP
READY I/O
Favourites
Motor Nom Freq
50.00 Hz
3 Make a selection of Rem from favourites.
STOP
READY I/O
Motor Nom Freq
Rem from favourites
Help
Monitor
4 To remove the item, push the OK button again.
8.3 USER LEVELS
Use the User level parameters to keep the personnel who are not approved from making
changes in the parameters. You can also prevent accidental changes in the parameters.
When you make a selection of a user level, the user cannot see all the parameters on the
display of the control panel.
VACON · 200 USER SETTINGS, FAVOURITES AND USER LEVEL MENUS
8
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V