Vacon 100 flow Applications Manual

If you use the same items frequently, you can add them into Favourites. You can collect a set
of parameters or monitoring signals from all the keypad menus. It is not necessary to find
them in the menu structure one by one. As an alternative, add them into the Favourites
folder where it is easy to find them.
ADDING AN ITEM TO THE FAVOURITES
1 Find the item that you want to add to Favourites.
Push the OK button.
STOP
READY I/O
Basic Settings
Motor Nom Freq
Motor Nom Speed
Motor Nom Voltg
230.00 V
50.00 Hz
1430 rpm
2 Make a selection of Add to favourites and push the
OK button.
STOP
READY I/O
Motor Nom Freq
Edit
Help
Add to favourites
3 The steps are now completed. To continue, read the
instructions on the display.
STOP
READY I/O
Motor Nom Freq
was added to
favourites. Press OK
to continue.
REMOVING AN ITEM FROM THE FAVOURITES
1 Go to the Favourites.
USER SETTINGS, FAVOURITES AND USER LEVEL MENUS VACON · 199
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
8

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V