Vacon 100 flow - 10.14.11 Multi-Setpoint

10.14.11 MULTI-SETPOINT
P3.13.12.1 MULTI-SETPOINT 0 (ID 15560)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.2 MULTI-SETPOINT 1 (ID 15561)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.3 MULTI-SETPOINT 2 (ID 15562)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.4 MULTI-SETPOINT 3 (ID 15563)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.5 MULTI-SETPOINT 4 (ID 15564)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.6 MULTI-SETPOINT 5 (ID 15565)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.7 MULTI-SETPOINT 6 (ID 15566)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.8 MULTI-SETPOINT 7 (ID 15567)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.9 MULTI-SETPOINT 8 (ID 15568)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
P3.13.12.10 MULTI-SETPOINT 9 (ID 15569)
Use this parameter to set the preset PID setpoint value when the Multi-setpoint function is
used. Make the selection of the multi-setpoint with the digital input signals.
PARAMETER DESCRIPTIONS VACON · 319
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10