Vacon 100 flow Applications Manual

8.1.2 PARAMETER BACKUP
Table 114: The parameter backup parameters in the user settings menu
Index Parameter Min Max Unit Default ID Description
P6.5.1
Restore Factory
Defaults
831
Restores the default
parameter values and
starts the Startup wiz-
ard.
P6.5.2
Save to Keypad
*
0 1 0
Saves the parameter
values to the control
panel, for example to
copy them to another
drive.
0 = No
1 = Yes
P6.5.3
Restore from Keypad
*
Loads the parameter
values from the control
panel to the drive.
B6.5.4 Save to Set 1
Keeps a customised
parameter set (that is,
all the parameters
included in the applica-
tion).
B6.5.5 Restore from Set 1
Loads the customised
parameter set to the
drive.
B6.5.6 Save to Set 2
Keeps another custom-
ised parameter set
(that is, all the parame-
ters included in the
application).
B6.5.7 Restore from Set 2
Loads the customised
parameter set 2 to the
drive.
* Only available with the graphical display.
8.2 FAVOURITES
NOTE!
This menu is available on the control panel with the graphical display, but not on
the control panel with the text display.
NOTE!
This menu is not available in the VACON
®
Live tool.
VACON · 198 USER SETTINGS, FAVOURITES AND USER LEVEL MENUS
8
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V