Vacon 100 flow Applications Manual

V2.10.11 PUMP 5 RUNNING TIME (ID 1624)
This monitoring value shows the operating hours of the pump in Multi-pump system.
V2.10.12 PUMP 6 RUNNING TIME (ID 1625)
This monitoring value shows the operating hours of the pump in Multi-pump system.
V2.10.13 PUMP 7 RUNNING TIME (ID 1626)
This monitoring value shows the operating hours of the pump in Multi-pump system.
V2.10.14 PUMP 8 RUNNING TIME (ID 1627)
This monitoring value shows the operating hours of the pump in Multi-pump system.
9.9 MAINTENANCE COUNTERS
V2.11.1 MAINTENANCE COUNTER 1 (ID 1101)
This monitoring value shows the status of the maintenance counter.
The status of the maintenance counter is shown as revolutions multiplied by 1000, or in
hours. For the configuration and activation of this counter, see 10.17 Maintenance counters.
9.10 FIELDBUS DATA
V2.12.1 FB CONTROL WORD (ID 874)
This monitoring value shows the status of the fieldbus control word that the application uses
in bypass mode.
Depending on the fieldbus type or profile, the data that is received from the fieldbus can be
modified before it is sent to the application.
MONITORING VALUE DESCRIPTIONS VACON · 211
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
9

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V