Vacon 100 flow Applications Manual

•
ID1777: 1 (years)
•
ID1778: 240 (days)
•
ID1779: 2 (hours)
•
ID1780: 18 (minutes)
•
ID1781: 0 (seconds)
10.22.5 ENERGY COUNTER
The energy counter counts the total quantity of energy that the drive gets from the supply
network. The counter cannot be reset. To read the value of the counter through fieldbus, use
these ID numbers.
ID 2291 Energy Counter
The value has always 4 digits. The format and the unit of the counter change to agree with
the energy counter value. See the example below.
Example:
•
0.001 kWh
•
0.010 kWh
•
0.100 kWh
•
1.000 kWh
•
10.00 kWh
•
100.0 kWh
•
1.000 MWh
•
10.00 MWh
•
100.0 MWh
•
1.000 GWh
•
etc...
ID2303 Energy Counter Format
The energy counter format gives the position of the decimal point in the value of the Energy
Counter.
•
40 = 4 digits, 0 fractional digits
•
41 = 4 digits, 1 fractional digit
•
42 = 4 digits, 2 fractional digits
•
43 = 4 digits, 3 fractional digits
Example:
•
0.001 kWh (Format = 43)
•
100.0 kWh (Format = 41)
•
10.00 MWh (Format = 42)
ID2305 Energy Counter Unit
The energy counter unit gives the unit for the value of the Energy Counter.
PARAMETER DESCRIPTIONS VACON · 357
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V