Vacon 100 flow Applications Manual

5.16 GROUP 3.16: MAINTENANCE COUNTERS
Table 94: Maintenance counters
Index Parameter Min Max Unit Default ID Description
P3.16.1 Counter 1 Mode 0 2 0 1104
0 = Not used
1 = Hours
2 = Revolutions * 1000
P3.16.2
Counter 1 Alarm
Limit
0
2147483
647
h/kRev 0 1105
0 = Not used
P3.16.3 Counter 1 Fault Limit 0
2147483
647
h/kRev 0 1106
0 = Not used
P3.16.4 Counter 1 Reset 0 1107
P3.16.5 Counter 1 DI Reset 0 490 CLOSED = Reset
VACON · 180 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V